Star Bobbin Anti Spin Spring 490468LB
£0.70 +VAT
Star Anti Spin Springs
Large Capacity Drop in Bobbin Anti Spin Spring.
For Highlead, Typical, Brother, Juki & Seiko
Part No 490468LB
Honeycomb anti spin spring part numbers listed below
Part No. 156557-001
Also known as S09286-00
Trojan Sewing Machines supply Equivalent Twin Needle Lockstitch Machines.
Model’s Jack JK 58720C-005 and Jack JK 58750C-005.
Trojan Sewing Machines also supply Equivalent Walking Foot & Needle Feed Lockstitch Machines.
Model Trojan GC20618-1 & GC0618-1SC
All with modern designs and the latest technology. All competitively priced.
- Description
- Additional information
Description
“We are the Parts People” – What can we do for you ?
Bobbin Anti Spin Spring
Part No 490468LB
Honeycomb anti spin spring part numbers listed below
Part No. 156557-001
Also Ref. No. S09286-001
These very useful “Star Disc” Anti-Spin NO BACK LASH Springs #490468LB are inserted into LARGE size Bobbin Cases to prevent the bobbin from spinning when the machine is stopped suddenly. Large fully loaded bobbins can be quite heavy and tend to keep spinning when the sewing machine is stopped. This can easily cause the bobbin thread to spill out of the bobbin case. If this happens, the thread will snap as soon as the operator begins to sew.
These NO BACK LASH Springs will fit all LARGE BOBBIN machines with bobbins that are a MINIMUM 28mm WIDE.
Is used In other large capacity Hooks & Bases
Highlead GC20618-1
Highlead GC20618-2
Highlead GC20698-1
Highlead GC20698-2
Trojan GC20618-1
Singer 211 Large capacity hook
Singer 212 Large capacity hook
Brother LS2-B837
Juki LU-563
Typical GC20206
Typical GC20206-1
Additional information
| Weight | 2 g |
|---|
You may also like…
-
Add to basketQuick ViewInner Zip / Piping Foot Left Toe 240153
£6.85 +VATCompound Feed Zip / Piping feet.
Inner Zip / Piping Foot (Left)
The needle hole is off set to the right to enable stitching very close to the zip or piping cord…
Part No. 240153
We strongly recommend that this inner foot pairs up with the outer foot Part No 240133
Trojan Sewing Machines Supply Equivalent Walking Foot & Needle Feed Lockstitch Machines.
Model Trojan GC20618-1. GC0618-1SC
All with modern designs and the latest technology. All competitively priced.
Add to basketQuick View -
Add to basketQuick ViewOutside Piping Foot S31-3/8″ = 9.5mm
£5.25 +VATOutside Piping Foot used in conjunction with an Inside piping foot.
This set up is for putting piping in with the piping been sewn in on the left of the needle as you are sitting at the sewing machine.
Part No. S31-3/8
All Sizes available 1/8” 3/16” 1/4” 5/16” & 1/2”
Used with S30 Inner foot.
Trojan Sewing Machines Supply Equivalent Walking Foot & Needle Feed Lockstitch Machines.
Model Trojan GC20618-1 & GC0618-1SC.
All with modern designs and the latest technology. All competitively priced.
Add to basketQuick View -
Add to basketQuick ViewPiping Foot Set S32-1/8″ = 3mm
£10.89 +VATS32-1/8″ Two Piece Piping Set. For needle feed walking foot machines.
This set up is for putting piping in with the piping been sewn in on the left of the needle as you are sitting at the sewing machine.
Part No. S32-1/8
All Sizes available 1/8” 3/16” 1/4” 5/16” 1/2” & 5/8”
The S32 piping sets cover the larger piping cord of 1/2” & 5/8”
Trojan Sewing Machines Supply Equivalent Walking Foot & Needle Feed Lockstitch Machines.
Model Trojan GC20618-1 & GC0618-1SC.
All with modern designs and the latest technology. All competitively priced.
Add to basketQuick View -
Add to basketQuick ViewWalking Foot Needles 135×17 X 110
£2.90 +VATExcellent quality German needles by a name you can trust.
This needle is for use on Fabric Material
Schmetz system R = Ball point.
Needles are sold in qty’s of packs of 10 or box of 100.
Thread suitable for this needle: 69 Bonded Nylon – Metric 40’s Thread – V30
Ball Point (BP) needles are designed to alleviate making holes in materials. The cross fibres which constitute woven materials. When a needle with a standard “sharp” point encounters one of those fibres in penetrating the fabric, it cuts right through the fibre. This creates a hole in the fabric. The Ball Point needle pushes aside the fibre it encounters in penetration and thereby avoids making a damaging hole in the fabric.
Needle system: 135×17 Ball point needle.
There is no such thing as a cheap needle. That’s exactly what they are – cheap !They are just inferior quality. The needle is the first point of contact between your machine and your product, so never compromise on quality-when you choose the needle for your job. WE only use, Distribute & Recommend SCHMETZ Needles.
Add to basketQuick View -
Add to basketQuick ViewWalking Foot Needles 135×16-120RTW
£3.85 +VATExcellent quality German needles by a name you can trust.
This needle is for use on Leather / PVC / all man made material’s that are not woven.
Schmetz system RTW = Reverse Twist Point.
Needles are sold in qty’s of packs of 10 or box of 100.
Thread suitable for this needle: 69 Bonded Nylon – Metric 40’s Thread – V30
Needle system: 135×16 RTW.
These high quality leather needles by Schmetz are optimized for heavy, dry and hard leather. The blade cuts fibers so that the needle does not have to separate them.
This makes them ideal for all types of leather and best for decorative seams. The RTW can be used for the manufacture of leather footwear through to bags. Used on most walking foot sewing machines that take the 135X17 needle system.There is no such thing as a cheap needle. That’s exactly what they are – cheap !They are just inferior quality. The needle is the first point of contact between your machine and your product, so never compromise on quality-when you choose the needle for your job. WE only use, Distribute & Recommend SCHMETZ Needles.
Add to basketQuick View -
Add to basketQuick ViewOutside Piping Foot S31-1/4″ = 6.4mm
£5.25 +VATOutside Piping Foot used in conjunction with an Inside piping foot.
This set up is for putting piping in with the piping been sewn in on the left of the needle as you are sitting at the sewing machine.
Part No. S31-1/4
All Sizes available 1/8” 3/16” 1/4” 5/16” & 1/2”
Used with S30 Inner foot.
Trojan Sewing Machines Supply Equivalent Walking Foot & Needle Feed Lockstitch Machines.
Model Trojan GC20618-1 & GC0618-1SC.
All with modern designs and the latest technology. All competitively priced.
Add to basketQuick View -
Add to basketQuick View
Piping Foot Set S32-1/4″ = 6.4mm
£10.89 +VATS32-1/4″ Two Piece Piping Set. For needle feed walking foot machines.
This set up is for putting piping in with the piping been sewn in on the left of the needle as you are sitting at the sewing machine.
Part No. S32-1/4
All Sizes available 1/8” 3/16” 1/4” 5/16” 1/2” & 5/8”
The S32 piping sets cover the larger piping cord of 1/2” & 5/8”
Trojan Sewing Machines Supply Equivalent Walking Foot & Needle Feed Lockstitch Machines.
Model Trojan GC20618-1 & GC0618-1SC.
All with modern designs and the latest technology. All competitively priced.
Add to basketQuick View -
Add to basketQuick ViewWalking Foot Needles 135×16-160RTW
£3.85 +VATExcellent quality German needles by a name you can trust.
This needle is for use on Leather / PVC / all man made material’s that are not woven.
Schmetz system RTW = Reverse Twist Point.
Needles are sold in qty’s of packs of 10 or box of 100.
Thread suitable for this needle: 69 Bonded Nylon – Metric 40’s Thread – V30
Needle system: 135×16 RTW.
These high quality leather needles by Schmetz are optimised for heavy, dry and hard leather. The blade cuts fibres so that the needle does not have to separate them.
This makes them ideal for all types of leather and best for decorative seams. The RTW can be used for the manufacture of leather footwear through to bags. Used on most walking foot sewing machines that take the 135X17 needle system.There is no such thing as a cheap needle. That’s exactly what they are – cheap !They are just inferior quality. The needle is the first point of contact between your machine and your product, so never compromise on quality-when you choose the needle for your job. WE only use, Distribute & Recommend SCHMETZ Needles.
Add to basketQuick View -
Add to basketQuick ViewWalking Foot Needles 135×16-130RTW
£3.85 +VATExcellent quality German needles by a name you can trust.
This needle is for use on Leather / PVC / all man made material’s that are not woven.
Schmetz system RTW = Reverse Twist Point.
Needles are sold in qty’s of packs of 10 or box of 100.
Thread suitable for this needle: 69 Bonded Nylon – Metric 40’s Thread – V30
Needle system: 135×16 RTW.
These high quality leather needles by Schmetz are optimized for heavy, dry and hard leather. The blade cuts fibers so that the needle does not have to separate them.
This makes them ideal for all types of leather and best for decorative seams. The RTW can be used for the manufacture of leather footwear through to bags. Used on most walking foot sewing machines that take the 135X17 needle system.There is no such thing as a cheap needle. That’s exactly what they are – cheap !They are just inferior quality. The needle is the first point of contact between your machine and your product, so never compromise on quality-when you choose the needle for your job. WE only use, Distribute & Recommend SCHMETZ Needles.
Add to basketQuick View -
Add to basketQuick ViewOuter Zip / Piping Foot Left Toe 240133
£7.50 +VATCompound Feed, Unison feed.
Outer Zip / Piping Foot (Left toe)
Part No. 240133
We strongly recommend that you use this foot in a matching pair with inner zip/ piping foot
Part No 240153
Trojan Sewing Machines Supply Equivalent Compound Feed Lockstitch Machines.
Model Trojan GC20618-1. GC0618-1SC
All with modern designs and the latest technology. All competitively priced.
Add to basketQuick View
